Guitar Leg's EyeFull model guitar stand is a new stand made for practicing musicians. You can always keep your Guitar handy because the stand is attachable to the Guitar. A super-thin (3mm) small track is located correctly and then quickly attached with a removable foam tape adhesive strip. Once the track is installed, the Guitar Leg stand is slid into place, where it latches and is ready for use. The Leg can be folded to the stored low-profile position or flipped out to the open position. Once open, you can set your Guitar down on any flat hard surface. The stand is small and can remain on your Guitar indefinitely. Should you want to remove it for storage in your case, lift the latch at the top and slide it off the track. The Instrument must have a symmetrical body at the base and a flat, unobstructed area on the backside 7.5 inches from the bottom and 4.75 inches wide.
You are responsible for ensuring that your Guitar is balanced and stable before releasing the neck as you rest it on your guitar leg. Guitar Leg will not be held liable for any damages resulting from your Guitar falling over for any reason. Or from improper removal technics of the mounting track.
The only part of the stand that should touch your Guitar is the adhesive foam strip that attaches to the mounting track. Should you ever decide that you no longer want it installed, you can easily remove the track with a length of dental floss pulled back and forth between the track and the foam. Once the track is gone, pull sideways on the strip to stretch it and release the adhesive. Any remaining residue can be safely removed with Goo gone, Goof off, or a citrus-based hand cleaner.
Copyright © 2023 Guitarleg - All Rights Reserved.